RCU Forums - View Single Post - Cortex output frame rate?
Thread: Cortex output frame rate?
View Single Post
Old 01-29-2015 | 01:29 PM
  #5  
wfield0455's Avatar
wfield0455
My Feedback: (7)
 
Joined: Sep 2005
Posts: 1,299
Received 5 Likes on 4 Posts
From: Holliston, MA
Default
Originally Posted by Len Todd
So that is 22 ms for digital. Right?
The slower, 55Hhz frame rate ( ~18ms) would be for Analog servos and would be the default setting for the Cortex. Digital servos can usually handle the 220Hz rate. If you have too high of a frame rate selected you will start to get very twitchy servo movements..
Last edited by wfield0455; 01-29-2015 at 01:33 PM.
wfield0455 is offline  
Reply Like