[HR][/HR] Here is some pics of the wing all done. All linkages are hooked up but no hinges glued in yet and gear is in place. I realize that the gear legs on this and many dauntless models don't line up in the proper location on the wing dihedral joint but I'm OK with that. I more concerned with getting the proper strut look out of it. I don't like a lot of the new wave of Seagull and VQ Dauntlesses with the gear struts on the outside. Nothing wrong with the ARF's, just the retract strut layout.
Half flap with flap switch
Full flap with flap switch
Half dive brakes/flaps deployed with Aux 2 switch (aux 2 switch mixed with flaps)
Full dive brakes/flaps with Aux 2 switch
Gear down
Wing bottom (something about a nice scale wing!)
Servo access 1/16 ply covers
Mica control horn.