Wonder if you can help.
I test flew a model yesterday with the following set up (used to be IC power)
Chilli Breeze RC Plane
Mega Motor 22/30/2 motor
Saker 80Amp Esc
4s 3200 Lipo
10 x 6 APC E prop
22/30/2
Model took off of the ground fast and flew around for a few minutes fine then I lost power to the motor.
Landed and inspected model.
Motor and ESC warm.
Motor now stuttering / cogging / jittering with prop on.
Motor runs smoothly with prop off! (tested on bench with a 3s 2200mAh Lipo
Any idea what my issue maybe?