Found some pictures of our 2 air boats,The big one shows what the Chain saw motor version can look like. We do not make the cages or Rudders yet, And never will in house as we are a fiberglass shop and not a wielding Machine shop. But the great running hull is always a foundation. That is useful to people who do not want to guess on a great running hull. The smaller boat shown is full size at 35"long by 16" wide.The deck over was done by the customer, we only make the bare hull for 70.00. They are great powered with a .80 four stroke or a .60 2 stroke. I do not know what the right power would be for electric. Many cut this hull down to make her look more scale and remove the rounded front with a straight flat front. We made it taller all the way around for better use in open waters.This hull has won many competitions held at the Coacoa civic center. Cocoa is the Air boat capital of the world. Having a hobby shop here. it was easy to get real knowledgeable help on these boats. In both cases. the customer has to put together the power package and rudder assembly. But hey that is modeling and you get a great foundation.