Problem with my 50 cc Rimfire and Castle HV setup
I hope someone can help me with this
I recently converted my Aerowork's 30 % Yak from Gas to electric I installed a Rimfire 50 cc and a Castle 120 amp HV ESC
After 5 or 6 very nice flights using 2 /6 cell 5000 mah batteries (50 C )
I tried a new set of batteries 5200 mah 75C . The brand is Zeee and 3 seconds after take off the motor shut down and unfortunately took the gear off the plane.
By the way I'm running a 22x10 falcon prop
I certainly didn't overheat Could these batteries be too much?
I really don't understand Can anyone shine some light on the problem
Bill