I just found this thread. I have a .60 size TF Gold Series partially built I want to rework. I traded a Goldberg Cub kit and a ST .40 (made in Italy) for this airplane. The wing is built with Robart retracts and 4 3004 Futaba servos installed. The Robart air chuck was mounted through the fuselage side with a plywood cutout glued to the outside. Its as ugly as you just imagined. The balsa skin of the wing in the inboard area needs a little rework too. I traded figuring I would at least get a good set of retracts and 4 servos out of the deal. The Corsair is an added bonus. I plan on mining this thread for ideas and will rework my airplane after I get a few current projects finished.