RCU Forums - View Single Post - Emax HAWK 5 with R-XSR Receiver
View Single Post
Old 07-09-2018, 12:24 AM
  #1  
coolt5
My Feedback: (2)
 
Join Date: May 2008
Location: Jeddah, SAUDI ARABIA
Posts: 76
Likes: 0
Received 1 Like on 1 Post
Default Emax HAWK 5 with R-XSR Receiver

Hi all

i have a EMAX HAWK5 and i just install my Frsky R-XSR receiver to get a telemetry as S.PORT or F.PORT.

but i was unlucky until now i couldn't get telemetry to work . like PIDs , RATES , FILTERS , PWM , RX and VTX

S.PORT : Name:  confused.gif
Views: 189
Size:  1.1 KBName:  confused.gif
Views: 189
Size:  1.1 KB
i connect the sbus+5v+ground and S.PORT to TX in UART 3 and trying the cli commands line for inverted to on and off = But it didn't work

F.PORT : Name:  confused.gif
Views: 189
Size:  1.1 KBName:  confused.gif
Views: 189
Size:  1.1 KB
i flash my r-xsr with the f.port protocol and connect all wires to UART6 AND UART1 : 5V+ground+s.port to TX in UART1. select F.PORT IN CONFIGURATION
and try CLI commands :
set serialrx_halfduplex = OFF
set serialrx_inverted = ON

but it now working .

Name:  confused.gif
Views: 189
Size:  1.1 KB Name:  confused.gif
Views: 189
Size:  1.1 KBSO ANY HELP PLS I JUST WANT TO CHANGES MY SETTING FROM MY TARANIS X9D+ Name:  confused.gif
Views: 189
Size:  1.1 KB Name:  confused.gif
Views: 189
Size:  1.1 KB