Originally Posted by
VincentJ
Mike and Steve, These style clamps are invaluable to this type of building. They come in a variety of sizes as well as the bars coming in different lengths. By flipping the heads around they can clamp from the inside instead of the more normal outside clamping.
I have a couple Irwin and a few other types like Dewalt and some really cheap ones from Harbor Freight. I didn't know the heads turned around! I used them to clamp the LE and TE when gluing and they helped a lot. But I did have to watch the tightness because the clamp faces didn't stay parallel if clamped too tightly and I;m not talking about much here. It helped when the heads were pushed a little more forward past then center of pressure. In the end they were much easier to use. I bought a few when I got to building again which is my current build now.