Thanks Jan. Noted and appreciated. I am trying to stick with scale rather than performance and have sourced a scale 2 blade spinner and 14x6 two blade for a future trial.
In other news, I am repositioning my Gear legs 20mm closer to the centreline to reduce the length and prevent oscillation during landing.
As I am using 5% Nitro glow mix, I am changing to a No.7 plug to hopefully reduce the motor loading up at idle.
Really though, my build (apart from the imminent shortening of my gear legs and improving the gear forward rake) is complete and a success. Apart from wishing I could strip about 500 grams off the final build so has some floating tendencies anything else I do from here is is tuning and tweaking.
Last edited by Vortrog; 07-24-2019 at 09:41 PM.