RCU Forums - View Single Post - TF Beechcraft Bonanza F33A Build
Thread
:
TF Beechcraft Bonanza F33A Build
View Single Post
04-06-2020, 08:33 AM
#
1030
VincentJ
Join Date: Mar 2011
Location: Peterborough, NH
Posts: 4,582
Likes: 3
Received 117 Likes on
107 Posts
I'm sorry that I haven't posted anything new, but while I'm waiting for parts, I decided to tackle a project for a friend of mine. This is an Ultra Stick Ultra Lite. I thought the change of pace might do me some good as well...Work will resume shortly, till then enjoy these photos!
I replaced the firewall since the previous owner had drilled too many holes in the original firewall. A thicker firewall was installed with 2 degrees of right thrust added. A DA-35 was mounted on the front.
A hatch was cut into the top of the fuselage that will allow easy access to the throttle servo which will be relocated below.
The covering was reworked along with a different covering scheme added to the front.
Last edited by VincentJ; 04-07-2020 at
12:52 AM
.
Reply
Like
VincentJ
View Public Profile
Send a private message to VincentJ
Find More Posts by VincentJ
View iTrader Profile