50koruny

Thank you very much.All my printers are focused on the quality.Printing slowly with high quality printers and materials.

Using a lot of Anycubic stuff.
Highly modified Anycubic Kossel Delta (two pieces), a little bit modified Anycubic 4max (waiting for another upgrades, but far less modified in comparsion with Kossels), Anycubic Photon-S and my own home-made printer (oldest one).

As i have said - focused on slow prints with 0,1 - 0,12mm layers and 0,3mm nozzles.24 or 36 hours are usual times for biggest parts.30-40mm/s.


Have found another pictures.Wheels/tracks assembly.Printed with ASA and TPE.