RCU Forums - View Single Post - MATHE 35 Does anyone use it? in which boats?
Old 05-07-2020, 12:03 PM
  #5  
LumacheFertili
Junior Member
 
Join Date: Apr 2020
Posts: 24
Likes: 0
Received 2 Likes on 2 Posts
Unhappy

Originally Posted by Justaddwata
Unfortunately in the USA no one runs or races FSR-V class boats. Only in europe I believe. In the US surface drive is most popular.

50mph is an ambitious speed as it appears a heavy boat. It may be possible however FSR-V boaters may give a more accurate expectation based on such a drive.
The finished hull will lose approximately 25 kg (including fuel). But we can two 35cc engines .. 50 mph / h is not a little ... we hope to work well on the propellers.
The FSR-V 35cc hulls usually weigh 11kg and arrive at around 55 mph.
The propulsion is in line of rigids under the hull. The props is different
In Europe the Offshore or Duration (V) categories are both very popular ... I didn't know that in America it was less!
The Hull in costruction:
MAS-Torpedo 210cm 35cc x 2 FPV