I am trying to set up a Cortex Pro to stabilize 7 channels on a 120cc biplane with crow. (4 ailerons, 2 elevator and 1 rudder) My receiver is a Spektrum AR12310T Powersafe and I'm using a Spektrum IX20 transmitter.
I have a patch cable from the SRXL receiver port to port B on the Cortex Pro. I have completed teaching the input type correctly and servos 1-6 plugged into the Cortex Pro are now working as assigned in the transmitter. Servo 7 is supposed to plug into port A on the Cortex Pro however that port is not receiving data as that servo doesn't respond.
Any ideas on what I'm missing or is there another way to accomplish this?
Thanks