Originally Posted by Racerbuilder

Well....

We startet with Air-C-Race in 1999
We offered the Nemesis F1 Kit 1999
We ad tze Mong Racer in 2001
We ad the Pond Racer in 2003

So we offer the pond now since 17 Years....

We produced in China between 2008 and 2014, since 2015 we are back in germany and produce on our own.....

So pondracer we can offer following:Pond Racer 2 mot Airracer



A purebred racer. 2 engines, brought in the original with 3 times 3 liter car engines with methanol on 2×2,000 HP, this original Rutan Design flew considerable speeds. In a testflight inclination one of the engines came on fire and in the subsequent emergency landing, the machine overturned and the pilot Rick Brickert was killed. We took over the model from Manfred Topp and the model is really breathtaking. In over 21 molds, the parts are made without exception in GRP and CFRP and put together to a model which inspires the spectators on every flight day. The model can be motorized from 60 ccm up to 100 or even more ccm … we have pretty much built everything that there are engines …. 60ccm, in our opinion, but the lower engine is dar …. 75 twin spark , 90 he 1 cylinder 135 he 4 strokes, 112 he 4 cylinders or 12 KW electric with 45 cells per side …. everything had been there before …. not difficult to fly and land landing as well as easy to land.



Scale 1: 2.5

Span 2.93 meters

Length 2.44 meters

Weight from 18 kg without fuel

Drive 2x60ccm to 2x100ccm



Kit contents:

• 2 fuselages with tail mounts
  
• 2 outside carrying surfaces with elastic ailerons
  
• 1 indoor deck with Elastic flaps
  
• 2 aluminum tubes
  
• 1 elevator
  
• 2 Finns small
  
• 2 Finns Gross
  
• 2 hoods
  
• 2 spinners aluminum
  
• 1 rudder
  
• 1 cover with lock
  
• 1 canopy frame
  
• 1 clear cabin hood
  
• 2 Suspension Panel / Speedbrakes
  
• 2 tanks each with 1.0 liter venting and tanker
  
• 1 CNC frame set in foam / GRP and wood as well as wood / CFK
  
• 1 small parts and screw set (aluminum, plastic and stainless steel screws)
  

We offer the kit in 3 variants:

Basic:

This kit is for the lovers of the tight budget. All parts as above, but here are only the Hauptsteckungsspant and tailstock installed and calibrated. The other frames can be glued themselves, but are included.

Price:3,499 euro



ARF:

Here are all parts installed, glued, rudder lever installed, landing gear flaps struck, plug, rc boards, tank, horizontal stabilizer, servo frame everything already created and ready to install the RC system and engines.

Price:4,999 euro



Turnkey:

Ever ordered a model in such an execution? We not only offer our models in this version but also external kits. Execution: All work is done. Electric undercarriage from Behotec, engines from 3W (2x75erTS), RC components and batteries from Powerbox, servos from Savox, paint on request, ready to fly and set. We build and set everything. Model is delivered down to transmitter and receiver. (Forwarding agency EU included)

Price:10,999 euro



Interest? Get an offer at [email protected] and we will make you an offer according to your ideas and with your desired components. We manufacture all parts in Germany, all composite materials are sourced from German dealers, all materials used meet the highest quality standards and have been tried and tested over decades. Composite and hand laminate, painting and assembly are built in Germany by our own professionals, we are a training company and train technical modellers. Your project is in good hands.



Youtube Video: https://www.youtube.com/watch?v=UYTmMOGrHPY