RCU Forums - View Single Post - 3d printed Bailey bridge
View Single Post
Old 04-13-2021, 08:07 AM
  #38  
Pah co chu puk
 
Pah co chu puk's Avatar
 
Join Date: Apr 2010
Location: Ridgway, CO
Posts: 3,231
Received 143 Likes on 93 Posts
Default

Thank you!

6 truss sections long now. That's 60 scale feet. I did a load test, with 40 lbs. at the mid span. No problem.

Some specs.
6 truss sections long. (60 scale feet)
43 1/2-inch free span.
45-inch road deck without ramps.
60-inch road deck with ramps.
15 inches wide outside to outside.
10-inch-wide road deck. (wider than true scale so my Abrams can use the bridge too)
Ramp angles are adjustable for terrain.




The following users liked this post:
ksoc (04-13-2021)