Originally Posted by
FUTABA-RC
Make sure batteries are fully charged
Get the RX and TX antennas as close as possible, touching is ok
Hold the LINK button on the RX down for several seconds, the LED will blink red, then release.
Blinking green means the RX sees a signal, but is not linked
Soild red means the RX is not seeing a signal from any transmitter
If LED on RX remains red then the fault is likely in the transmitter. I suggest sending it in to your nearest service location if the above does not work.
RX led remains solid red. So, Please provide the contact details ( email & telephone number) of nearest service center.
I am from Goa, India.