RCU Forums - View Single Post - Rc edf jet advice
View Single Post
Old 05-26-2022, 12:43 AM
  #3  
Joseph Frost
 
Join Date: Nov 2010
Location: Coffs Harbour NSW, AUSTRALIA
Posts: 1,563
Likes: 0
Received 71 Likes on 67 Posts
Default

Originally Posted by USAFDefender
Hi everyone, this is my first post. Used to be big into RC helis and drones years ago. I also have experience with flight simulators. I'm looking at the E-Flite 70mm F16 and I'm wondering if that's a good plane to start with, or if you would recommended something else. I have experience with 2-4 channel transmitters. I've done heavy research and I'm going with a spectrum NX 10 with hopes of flying bigger planes up to 90mm. Any thoughts, tips or tricks to help this semi begginer are appreciated.
Great model to start with if you keep it simple, I was in the similar boat, few decades ago switching from helicopters to jets and couple of "F-16's" by Kyosho were just a few I learn on. No landing gear, I have converted them to bungee launchers. (easiest way to get airborne unless you like to hand launch it)
Few of my recent Eflite and Sapac I have also converted to a sling shooters to keep it simple and light, running hot like a missiles, just pull and let go! No need for landing gear.

Simple convert to a sling shooter.


Falcon variety.

Easy sling launch.

90deg. X-wind launch.