RCU Forums - View Single Post - E-Sky Belt CP scale fuse model.
View Single Post
Old 08-17-2022, 02:04 AM
  #1  
Joseph Frost
 
Join Date: Nov 2010
Location: Coffs Harbour NSW, AUSTRALIA
Posts: 1,360
Likes: 0
Received 46 Likes on 44 Posts
Default E-Sky Belt CP scale fuse model.

Last couple of days I'm trying to get this sweet little model going, after getting my hands on it from my an old neighbour who crash it on his first atempt to fly it, over a decade ago.
I bought it with stripped main gear, easilly replaced but it was sitting under the table for many years ever since.
Apparently a real dog of a helicopter after contacting few heli nuts to get some idea, all urging me to forget about it which makes me even more keen to succeed with it.
I did confirm it by having number of short hover flights with it yesty and today on stock and my dedicated heli radio currently hooked up. I have managed to tame it down slightly but I still find it a hadful to even hover on one spot, as it has a tendency to get out of hand very quickly! LOL.
I have already tried 3 different gyros, the stock is crap, Piezo101 currently hooked not sure about, doesn't seem to respond the way I like and I tried even 3AXIS one, (Aero Gyro) unfortunatelly not compatible with this 3 servo 120deg. CCPM set up after spending hours every way to make it work.

I would like to get some simple 3 Axis (not for 300-400 bux!) one to suit this set up but it is a "fly-bar" model, so I haven't got a clue if these F/barless Gyros could be fitted and made operational as I don't have any experience using multy AXIS ones in helis.
Anyone still flying this model? As I can't find a single footage of it in action over thousands of posts in various International heli forums, beside lot of useless talking. LOL.

Little fun project currently on my work bench.

More progress now hooked to comp. radio for further fine tuning.

3Axis AERO CF-130 not compatible with CCPM after having a go.

Last edited by Joseph Frost; 08-17-2022 at 02:12 AM.