RE: Sig Mayhem 3D ARF
Why do I have this image of you standing there in Florida flying (with) your pants off. LOL I just don't like their style is all, the trim tape is an excellent solution to the seam. I left mine unfinished at this point and may not do anything with them depending on what I do to dress this up a bit. BTW I completed the entire assembly without the servo's and beyond fishing the wire through the wings I don't think that it'll be trouble at all. They really could have CA'd some paper tubes into the ribs for a wire guide. I do it on my kit models and it only takes a minute or two at best. I did look down the holes they had in them and they are not aligned enough for making and installing your own. This is unusual as these wings are most likely jig built.