Digital Servos and centering (Deadband)
One of the reasons to go to digital servos is centering accuracy.
After looking at the specs of some of your new servos, I need a little more understanding.
The standard 635 is listed in Servo City's specs as having a deadband of 4 microseconds.
The digital 5625 and 5645 are listed as 8 microseconds.
Questions:
1.) Will the 8 microsecond deadband have a noticeable effect on the centering capability? Hitec's really good servos have 1 microsecond deadband.
2.) Can the deadband be adjusted lower without ill effects using the programmer?
Thanks in Advance !!!
Edited to provide the correct P/N's