ORIGINAL: MustangFan
I have both spec. sheets in front of me now. (Available from the Hitec Web Site)
Both have the beadband listed at 1 microsecond for centering.
However, one of the biggest differences I see is the running current.
The 5945 servos are 1/2 the running current of the 5645 ( 180mA vs 350 mA @ 4.8 VDC).
MustangFan,
I can't find the spec sheet on the Hitec site that lists the amp draw of the servos. All I find is the specs on size, torque,volts, etc. Could you list the url for me. TIA