Have only flown RTF planes( 60 flights). Sold them and now have one where I have to install the receiver, receiver battery pack, and on/off power switch. Bought a Futaba 9 CAP and I don't know the sequence of where to plug in the various connectors to the receiver other than I know the first 8 slots are for servos. The 9th channel slot indicates "9 batt" ( I think....because it is so small I can't read it). The last slot on the receiver indicates "DSC" and I don't know what that means. Would appreciate an explanation of what connector goes where and how the battery and on/off/charge switch are connected. I can't find a web site or thread here that clearly explains the reveiver/servo/batt and switch set-up. BTW the plane is a GP Super Sportster with .46AX. Thanks in advance for your patience. [&o]