i just finished my first plane(SIG SENIOR)from a kit.got the motor in,dragged it outside on the picnic table and ran two more tanks thru it(4 total).the motor is an GMS .47 and i'm running omega 10% thru it with a 11x7 prop.
HERE'S THE PROBLEM!!
i can get it to idle nice but i can't get it to go to full throttle.somewhere around half gas she quits on me. she does it when i throttle up slow or fast! very confusing for a newbe!!! i leaned out high speed mix to one full turn from bottoming out.instructions tell me to bottom it out then back it out one and a half turns as a good starting point. is it possible that it still needs to be leaned out some more?? ANT INFO WOULD BE HELPFUL!!!!!!!!!! IN PROSSES PICS!!!