RCU Forums - View Single Post - Zeroli P51 Build
View Single Post
Old 12-11-2004, 12:45 AM
  #7  
Arthur K
 
Arthur K's Avatar
 
Join Date: Nov 2004
Location: Toronto, ON, CANADA
Posts: 391
Likes: 0
Received 1 Like on 1 Post
Default RE: Zeroli P51 Build

at this point I took out the highteck gear lined up the fues with a laser level because the fues is not built flat on a table I had to make sure it stays nice and strait
now it was time to glue the stringers I made sure to glue them flush with the formers the slots were cut wider than the stringers so i filed them in with epoxy thickend
with cabosil along with this I also managed to glass the controll surfaces on the p47 so now I am going to post those .
Thanks for checking in guys post me some pictures of your build
Attached Thumbnails Click image for larger version

Name:	Tq48948.jpg
Views:	89
Size:	43.2 KB
ID:	201547   Click image for larger version

Name:	Vq52004.jpg
Views:	96
Size:	39.2 KB
ID:	201548   Click image for larger version

Name:	Gl19308.jpg
Views:	100
Size:	50.3 KB
ID:	201549   Click image for larger version

Name:	Wp40705.jpg
Views:	96
Size:	52.7 KB
ID:	201550