Hornet1

Thanks for all your help guys, I started the Savage today and ran it for a complete tank on idle and gave it a few bursts to clear it up once in a while. It now has 2 full tanks burned into it. Acording to the manual, the next step will be to have it go in an oval on the ground and increase throttle then let coast (this is to be done for two full tanks). I noticed when I opened the throttle (full throttle) to clear it today, it was stalling on its way to idle (what I mean is the following - pressed full throttle, it responded with smoke and then when I release the throttle and the engine is on his way to idle, it stalls) What causes this? I also noticed towards the end of the second tank, it was idling faster and stalled a couple of times, is this because the LSN is too rich?

Thanks again guys.