RCU Forums - View Single Post - 1/4 SCALE CAP 232 FORUM
View Single Post
Old 04-05-2005, 02:05 PM
3D Joy
Senior Member
3D Joy's Avatar
Join Date: Dec 2002
Location: , QC, CANADA
Posts: 1,083
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 1/4 SCALE CAP 232 FORUM

The H9 cap is tail heavy by nature so you may not be forced to put all servos in the tail. The G26 is not THAT heavy also. If it was my plane, I would put 2 elevator servos in the tail and 1 rudder servo on pull pull as far forward as practically possible.