RE: too flimsy
GREAT HELP!!
thanks, I know there is 2 or 3 things that I've been doing wrong
1) the resin is been stored for apox. 2.5 years, (the hardener is brown)
2)I layed the cloth in the same direccion insted of changing to a 45* angle per layer
I think I have the mixing ratio rigth, and yes the part became a little stiff after a couple of days, but still is not hard like a 6 layer piece should be , now I just need to find out where to get the resins you talking about.
Thanks again
Edwin.