RE: Airtronics / Sanwa MX3 FM 3 CH Radio Swap Program
ok I don't even know what a Z connector is. All I know is they would not fit even with the top off the RX they would not go in frontwards or backward (I did try it both ways before it broke) when it did decide to start in I could see the side of the lid bulging. then I pushed alittle harder and it weny sideways towards the bulge and bent one of the pins when I tried to straiting it it broke off I know this is my fault but I don't understand why they wont fit but they didn't. now they do but it was the steering I broke. and I did hook up the throttle/brake and the shifter and they work fine and that told me I wasn't tring to put them in backward they just didn't fit it until I did some filling on the top of the box. I had never heard of a Z connector until I seen it on the RX. I take that back I remimber seeing something about them on sevor extention instrucktions.