RE: Who is converting Toro trimmers?
Hi Dave, I intend to post some pictures when I figure out how. My digital camera and it's software is part of the problem. I got too many irons in the fire. I also had to put a new hard drive in and lost a bunch of stuff on the old drive. You know, everything happens at once. I have done some more testing, I used a new 14mm carb on a single bbl Toro with a new carb manifold I made to match, the results were not spectacular, but the way it was running I now think the magneto must be defective. It was not running steady, I thought it might be too much carb, but this is the engine that ran the same way with the original carb. It still turned 7500 RPMs with a 16-8 and I think it will do much better. This is the same ZAMA carb as the one that gave me close to 8k with the 25cc Weedeater, so I will resume testing with another magneto. I plan on posting photos also, I took some photos already.