two elevator servo help
I have a hanger 9 cap 232 27%. I have done all I know to make the plane quit snapping when pulling back on the stick. If you go very slow it will not snap but if you move it over 1/4 stick it goes crazy. I have put a angle finder on the elevators and set end point the same. It looks like one side is moving a little faster than the other side. The servos are on different channels. I once had a plane that I put a Y in with a servo reverse but it failed in flight and I lost it, So I don't what to do that now. My servos are not digital so I can not program them. What do you all suggest me to do. Thanks Andy