View Single Post
Old 09-08-2005, 04:44 AM
  #21  
jseppanen
 
jseppanen's Avatar
 
Join Date: Jan 2005
Location: Tampere, FINLAND
Posts: 208
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Skymaster Hawk Once Again (at least!)

I think David means he installed the front main tank in horizontal position - not the UAT. Best position for UAT is fill line(s) up (=tank tilted about 45 degrees) or vertical (=pump feed up). This way there is minimal amount of trapped air after filling. This is if you fill the main tanks via UAT...

Janne