HL Mini Hot Rod
#1
Thread Starter
My Feedback: (13)
Join Date: Sep 2005
Location: syracuse,
NY
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
HL Mini Hot Rod
Just put together a HL mini rod. I did everything i could to keep it light definately under 5oz. All my own custom hardware. The rx is stripped from its pins and the servos are directly soldered. Setup is e-flite 250, 3 jason schulman 4.7g 18oz/in servos, phoenix 10, berg rx. Hovers right where it should around half throttle. Pics up tomorrow!! Anyone else have experience with this plane.
#2
Thread Starter
My Feedback: (13)
Join Date: Sep 2005
Location: syracuse,
NY
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: HL Mini Hot Rod
Pics! also prop is 8x3.8 wings are swept back instead of straight i believe i took about 1/4 in of each side at the ends, all custom fly3dnow.com hardware they are going to start kitting it with the carbon fiber and control horns(they really do work great!!) No slop from the linkage what so ever. this is one of my favorites!!! pull-pull rudder and elevator!!