Odorless CA
 

Hi Just getting into foam, where can I get some Oderless CA that wont attack the foam. A couple of local hobby shop just carry the regular CA both thick and thin . Received a 3D Foamy Edge 540 and would like to get underway and start building .

Thanks Bob Palmer

RE: Odorless CA
 

Try these links for some glue that will work. Hope this helps?

Brian

http://www2.towerhobbies.com/cgi-bin...?&I=LXCX52&P=7

http://www2.towerhobbies.com/cgi-bin...?&I=LXM365&P=7

http://www2.towerhobbies.com/cgi-bin...?&I=LXM367&P=7

http://www2.towerhobbies.com/cgi-bin...?&I=LXM368&P=7

RE: Odorless CA
 

Bob,

I'm using Bob Smith odorless ca with the Bob Smith Accelerator with good results. Also, be careful which accelerator you use on depron.....Pacer "Zap-Kicker" attacks it bigtime. All e RC carries something called "Foam Safe Accelerator" Here is the link:

http://www.allerc.com/store/product_...&products_id=5

Good Luck!
Rick

RE: Odorless CA
 

just use water in an atomiser for a kicker for foamsafe CA. its not a fast kicker but it cost nothing

RE: Odorless CA
 

Thanks for getting back so quick.. Bob Palmer

RE: Odorless CA
 

Bob,

Glad the Edge is there safe, hows the kit look to you? I can vouch for the stuff at www.allerc.com. I use it on all my foamys I build. Just make sure you get the accelerator on all the glue. It'll take 3-4 days to dry on it own!

RE: Odorless CA
 

did you look in the foamies session? there is a glue thread going there. might give you some hints.