RCU Forums - ~Help needed~

RCU Forums (https://www.rcuniverse.com/forum/)

- 3D Electric Flying! (https://www.rcuniverse.com/forum/3d-electric-flying-237/)

- - ~Help needed~ (https://www.rcuniverse.com/forum/3d-electric-flying-237/5004354-%7Ehelp-needed%7E.html)

Chipper91

11-16-2006 03:30 PM

~Help needed~

[&:]I am looking for a good aerobatic 3D electric airplane. I have about 4 hours experience. Is there a airplane
that can withstand most crashes?

stinger40

11-16-2006 04:01 PM

RE: ~Help needed~

Yes. U-Can-Do EP or Yak-54 from Great Planes. These two are called "Flightflex". The foam is bendable and will withstand most small crashes. Here is the link to Tower Hobbies. They sell both of them. Hope this helps. You can fly 3D with these, that is if you want to fly in the 3D field.

http://www2.towerhobbies.com/cgi-bin...ex&FVPROFIL=++

VictoryRoll-91

11-16-2006 07:51 PM

RE: ~Help needed~

4 hours.....

tIANci

11-16-2006 11:47 PM

RE: ~Help needed~

Seen too many raw beginners with foamies ... its bad news, because the plane is small and relatively cheap yet so much fun to fly we end up pushing it hard and it will not survive long. Just remember one thing, they are not made to crash. Take your time to learn to fly them and you will save a lot.

A good cheap foamie to fly is the ST Model YAK - stock set up with 3S lipoly and 9x5 prop ... superb. You have to go to the website and see the owner's so fly it!

http://www.stmodel.com/

All times are GMT -8. The time now is 12:22 PM.