SELECT ONE
 

Noob would appreciate comments as to which of these would not be too touchy yet perform.
I have the Dx7 & Ar600E & Kontronic 40-18-6, servos to come (HS65mg 4).
I understand this topic has been discussed, but on my research I have come up
with 3 A/C which look, I think, might serve the purpose[sm=72_72.gif]
http://www.3dhobbyshop.com/detail.aspx?ID=2277
http://www.extremeflightrc.com/html/extra300e.html
http://www.extremeflightrc.com/html/edge540e.html

Thanks in advance, Ed

RE: SELECT ONE
 

Well I guess I'll select my own A/C.
Thanks anyway.:eek:

RE: SELECT ONE
 

All three very nice planes, and a decent size. As a relative noob myself, and having wrecked an E-Flite Diamante today without quite knowing why, I would say, choose the most conservative, forgiving plane you can bring yourself to fly until you are an ace. I am not.

Good luck!

RE: SELECT ONE
 

Thanks lejongleur, I'm favoring the 3D HobbyShop 47"SR.

RE: SELECT ONE
 

You won't be sorry with the 3DHS Extra SR. Recommended that plane to someone else on another forum and he couldn't be happier. Only thing he doesn't like is he's only got 4 packs to fly it with! Can't seem to fly it often enough I quess. :DGo to RCGroups.com, there's a whole love fest of a thread for that plane and the Velox too. Good luck and keep em' flyin'!

Jason

RE: SELECT ONE
 

Here's a case where it almost doesn't matter........ bacause all three of these planes are teriffic. However, the SR is my favorite plane.


[link=http://www.rcgroups.com/forums/showthread.php?t=853087]Doc's Righteous SR Report[/link]


http://www.youtube.com/watch?v=66XuwxAwI30


http://www.youtube.com/watch?v=kC8DwWV_VGE