RCU Forums - E-Flite S-75 Servo problem

RCU Forums (https://www.rcuniverse.com/forum/)

- 3D Electric Flying! (https://www.rcuniverse.com/forum/3d-electric-flying-237/)

- - E-Flite S-75 Servo problem (https://www.rcuniverse.com/forum/3d-electric-flying-237/9939935-e-flite-s-75-servo-problem.html)

DMyer

08-17-2010 11:46 AM

E-Flite S-75 Servo problem

I have a small 3D foamy with an E-Flite s-75 on the Ailerons - and it loses it neutral center all the time... by a significant amount. Is there any history with this servo? Should I just buy another or go to a similar size servo from Hitec or JR? Thanks

Dan

patnchris

08-17-2010 06:45 PM

RE: E-Flite S-75 Servo problem

I have used many E-Flight S-75 servos over the past 5 years. I have stripped a few and had a few go wacky, but for the most part, they are pretty good. I would say just scrap that one and get another.

DMyer

08-17-2010 07:21 PM

RE: E-Flite S-75 Servo problem

Thanks... I will just buy another... I don't mind stripping gears... I replace gears all the time... but going wacki? Gives me the creeps... but hey... it is not a 35% plane - so what the hell! This plane has had a gentle life.. it is a Fancy Foam MX-2... never been wrecked.... bit the ailerons are HUGE!

Dan

Aircraftfreak15

08-18-2010 12:08 AM

RE: E-Flite S-75 Servo problem

i had on do that in mid flight on the right aleron on a low pass totaled the plane. i sugest a hitec servor alot better quality

All times are GMT -8. The time now is 06:46 PM.