Pilot Beat On 90 ARC (Anyone has one?)
09-30-2002, 05:44 AM
#3
Pilot Beat On 90 ARC (Anyone has one?)
I got mine from Magma RC former OK model distributor before they stop carrying the planes. It was a limited kit, so it will be very hard to find one.
Also, I am not sure if Beat On series are 3D capable. Although Artistic Aerobatic site shows the EZ BeatOn 50 as possible airframe.
Also, I am not sure if Beat On series are 3D capable. Although Artistic Aerobatic site shows the EZ BeatOn 50 as possible airframe.
10-03-2002, 11:14 PM
#4
My Feedback: (1)
Join Date: Oct 2002
Location: Oranjestad, ARUBA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Pilot Beat On 90 ARC (Anyone has one?)
Hello,pattern flyer i had one but i crashed it 2 months ago,mine was powered with a YS120FZ.Before it crashed i had a deadstick landing and here iN ARUBA we have winds blowing 30 knots all year round 
i was doing the masters sequence and i was going up wind when i had the flame out,but when i reached the runway the plane was stalling and it hit the runway hard,and i heard a krack,when we saw the airplane everything seemed okay.The next flight i was coming downwind and i hit full throttle to begin a rolling loop and when i gave up elevator and then the right wing blew apart on the wing spar,so the noise that i and my caller heard was of the wing spar that kracked,so watch out with a hard landing,that was the best flying airplane that i ever had i was looking for a 140 size but nothing do you know where to get one? thanks.
i was doing the masters sequence and i was going up wind when i had the flame out,but when i reached the runway the plane was stalling and it hit the runway hard,and i heard a krack,when we saw the airplane everything seemed okay.The next flight i was coming downwind and i hit full throttle to begin a rolling loop and when i gave up elevator and then the right wing blew apart on the wing spar,so the noise that i and my caller heard was of the wing spar that kracked,so watch out with a hard landing,that was the best flying airplane that i ever had i was looking for a 140 size but nothing do you know where to get one? thanks.
10-04-2002, 12:48 AM
#5
Senior Member
Join Date: Jan 2002
Location: Drums,
PA
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
Pilot Beat On 90 ARC (Anyone has one?)
Originally posted by hroachen
[B]I'm looking for a 3D/aerobatic plane for my YS91...
Thanks,
D [B]
[B]I'm looking for a 3D/aerobatic plane for my YS91...
Thanks,
D [B]
!! There's a thread in section of RCU about the UCD and several guys are using the YS91 with much success. Mine will hover at about half throttle with an APC 15-6. It's becoming one of my favorite planes and I only have about 6 flights on it............Mark
07-05-2020, 11:53 AM
#7
Junior Member
Join Date: Jul 2020
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PatternFlyer
I am looking for people who has Pilot BeatOn 90 ARC kit.
I have one flying with YS 91AC, and need some information about others'.
If you have one flying, let me know.
thanks,
I have one flying with YS 91AC, and need some information about others'.
If you have one flying, let me know.
thanks,
I have one! Brand new in box.
