Electric dragon 3D CG
#1
Thread Starter
My Feedback: (1)
Join Date: Feb 2005
Location: Santa Ana,
CA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Electric dragon 3D CG
I just finished install the Electric Dragon 3D. The plane can be found here
http://www.raidentech.com/eldr3d4rarec.html
The instruction says the CG is 40mm from the leading edge. With this point I have to move all the equipments,battery to the nose and add 7,8 oz for it to be balance. This is too much weight for this plane.
Anyone with some experience on this plane. Please give me an idea.
Thanks
http://www.raidentech.com/eldr3d4rarec.html
The instruction says the CG is 40mm from the leading edge. With this point I have to move all the equipments,battery to the nose and add 7,8 oz for it to be balance. This is too much weight for this plane.
Anyone with some experience on this plane. Please give me an idea.
Thanks