RCU Forums - Help!

Page 2 of 2

Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)

- 3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)

- - Help! (https://www.rcuniverse.com/forum/3d-flying-82/113700-help.html)

JBH	04-25-2002 06:11 AM

Help!

Quote:

Originally posted by Divesplat
If, and its hard to tell here, only the throttle another possibility may be the linkage to the carb. Believe DA put longer carb arms and 3W still has to be extended.

The solder came loose on my extension and caused something similar as the arm would catch occasionally and speed up.

Just another possibility.

Ed

Thanks, Ed. That was the kind of experience I was wanting to hear so I could rule out everything. I checked out the linkage and the butterfly... all in working order. A new radio solved the problem.

JBH	04-25-2002 06:12 AM

Re: Did you ask Futaba about it?

Quote:

Originally posted by robert
What did they say? :)

Refer to post #3 in this thread, Robert. :spinnyeye

wgeffon

04-25-2002 10:27 AM

Re: Help!

Quote:

Originally posted by JBH
Wayne... remember Mickey adjusted my throttle stick tension way down? Do you think he might have created a problem somehow?

Joe,
I dont know. He seemed like he knew what he was doing but then you never know if something got tweaked.
Send it in to be sure. Or you may just want to ship the whole package to me. Plane, motor and radio and I will do some extensive testing on it. ;)

Sorry it took so long to see this thread but I had a hard drive failure the other day and I havnt been on RCU much the last few days.

robert

04-25-2002 06:42 PM

Re: Re: Did you ask Futaba about it?

Quote:

Originally posted by JBH

Refer to post #3 in this thread, Robert. :spinnyeye

I meant if they pinned down the problem! :p

JBH	04-26-2002 08:34 AM

Re: Re: Re: Did you ask Futaba about it?

Quote:

Originally posted by robert

I meant if they pinned down the problem! :p

Oh... no, I hear Futaba doesn't set any speed records getting this stuff back... but we'll see.

All times are GMT -8. The time now is 02:16 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page