help me with pbf fun fly thanks
 

need some info on the pizza box fun fly love this plane is amazing i found a piece of 24 24 of coroplast here in costa rica which isnt very popular over here but it was cut in half i would like to know how will goop paste on coroplast

thanks marcelo

RE: help me with pbf fun fly thanks
 

get some wire that is a tite fit in the slots in the coroplast just dont try to end glue it together without reinforcing it if you look on down they have a spad place that has a lot of good stuff about the pbf goop if's it kinda like silicone it will work good

RE: help me with pbf fun fly thanks
 

thanks men i will try that and look at spad page the problem is that here in costa rica is difficult finding coroplast thanks god i found a piece that i wish it works this airplane is so cool

RE: help me with pbf fun fly thanks
 

Putting the two pieces together will work fine. Thats how I made my first qhor. I did as the previous poster said but I also glued one 2 1/2 long coro on the seem where the other coro joins. YOu should be able to do the same thing with the wood you will use for the fues (if thats what you want to call it).