learning to fly 3D
 

Could someone please give me some info on what size prop I should fly on a 60 sizs edge540 with a saito 1.20 For simple 3D

RE: learning to fly 3D
 

Im guessing a 16x4...im not good with that engine experience wise but Id like to look into it for you...ill get back at ya soon

Dan

RE: learning to fly 3D
 

Saito FA-120S Specifications
Bore:
32.0mm
Stroke:
24.8mm
Displacement:
20.0cc
Weight w/ muffler:
820g
Cylinder:
AAC
Exhaust Diameter:
14 mm
Crank Thread:
8 x 1.25mm
Propeller:
12.5 x 10 - 14 x 8 makes no sense because my SAito 72 swings a 14x4
RPM:
2,000 - 11,500
HP:
2.2

RE: learning to fly 3D
 

My Saito 100 swings a 15 X 6 rich at 9200 RPM on 30% Heli Powermaster. Pulls hard.

RE: learning to fly 3D
 

use a apc 16x6.........