RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)
-   -   Goldberg Extra 300 engine (https://www.rcuniverse.com/forum/3d-flying-82/1674047-goldberg-extra-300-engine.html)

sledman 03-30-2004 02:10 PM

Goldberg Extra 300 engine
 
I need some good ideas for an engine for a Goldberg 68" W.S. Extra 300. I would like excellant vertical performance, without too much added weight. I tend to lean towards 2-strokes. Ideas?

daveopam 03-30-2004 07:28 PM

RE: Goldberg Extra 300 engine
 
I had one when then first came out with a ST.90. Verticle was just OK. If your stuck on a two stroke go OS 1.08 or Webra 1.20. or maybe the new ST2300. I'm sure you will get some go four stroke replys. I would also push you that way if you had not mentioned your leaning to a 2-C.
Think about it though. A Saito 1.80 would be sweet on that bird.

David

Dave McDonald 03-31-2004 12:44 AM

RE: Goldberg Extra 300 engine
 
Several years ago I bought a used CG Extra that was being flown with a ST 90. Overall performance was good, but vertical was marginal. Replacing the ST 90 with a Thunder Tiger 1.20 made a big improvement in the vertical performance. The TT 120 gave it enough reserve power to pull out vertically from a hover.

I also have an OS 108 in a CG Ultimate. The TT 120 and the OS 108 weigh almost exactly the same, but the TT 120 has more power.

IMHO, if you want a two stroke for your Extra, the TT Pro 120 would be hard to beat.


All times are GMT -8. The time now is 12:21 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.