NEED HELP QUICK!
 

For a Balsacraft Extreme 3d will standard hitec servos on 4.8v be enough to 3d??

RE: NEED HELP QUICK!
 

I used 4.8 volt for ages, and its perfectly good.

RE: NEED HELP QUICK!
 

on this plane with standards?

RE: NEED HELP QUICK!
 

Not on this plane but on a trainer, yes with standards. 6 volts will only obviously give you more but loads of people use 4.8 volts with no problem at my field with 3d planes.

RE: NEED HELP QUICK!
 

or the best way to go is nimh 4 cell 1800mah
which is a 4.8[X(][&:]


what is yours junior[8D][sm=confused.gif]

RE: NEED HELP QUICK!
 

Standard BB servos are better if you have them, but I have used standard servos on 4.8, and it works. 6v is better though, especially if you plan to 3D

Stefan

RE: NEED HELP QUICK!
 

ok guys....i know that 4.8v is fine for stamndard servos what i'm asking is if i can use standard servos and 4.8v on this plane

RE: NEED HELP QUICK!
 

u say hitec servos..........what ones!!!!!

RE: NEED HELP QUICK!
 

standard servos they come with a flight pack

RE: NEED HELP QUICK!
 

Should be fine

Stefan