Rocket City Hardware
 

Hello All,
I'm just curious. I am setting my Edge up for 3D and want to outfit it with rocket city hardware. I can get what I need at Neson hobbies, but I don't know the P/N's. Is there an internet reference with pitures / p/n's so I know what I'm ordering that I can look at?
I appreciate the assistance.
Regards,
RickP

Rocket City Hardware
 

Contact John Mitchell from Aeroprotect.com
http://www.aeroprotect.com/Products/RC_Linkage.html

Rocket City Hardware
 

If you do a search here on the 3D forum for Katana first flight,started by me,you will see some pics of the R/C hardware on my Edge.The servo end ball liknks are #87,and the control horns are 01B,the control horns come with two single screws and a 3" threaded rod and enough hardware to set up two horns or one double horn for pull-pull.Or you can use the 01A which only comes with one horn set up,I perfer the 01B.I would try Don's hobby Shop for these parts,my experiences with Nelson have been terrible,and Don's stocks all the Nelson products also,and will have them to you in 3 days,With Nelson who knows when you'll see them!!But that is only my experience.
here is the link to the thread
http://www.rcuniverse.com/showthread...a+first+flight
Mikee

Rocket City Hardware
 

does rocket city have a website?

Rocket City Hardware
 

Up until this year Rocket City was an independent line; then they sold out to Nelson Hobby, which is their new home. So check the Nelson site, but they may not have updated the Rocket City items, since this all happened this summer I believe it was.