3D/Kit/ARF
 

:rolleyes: Are there any 1.20 size 72" to 76" wingspan semi-scale aerobats (Exrtra, Edge, Cap, Etc.) that will 3D with a 1.20 engine? Either kit or ARF. I am not looking for a 1.20 size plane that requires a 1.80 Glo or a 40cc to 50cc gasser to 3D. I have a good strong Webra 1.20 in a 11.5 Lb. GP G202 that flies very nicely but 3D is out of the question. Any and all comments are welcome.

Bob C.

3D/Kit/ARF
 

Bob I am afraid I have bad news bud, there is not anything with a 72" wingspan or especially a 76" that is light enough to 3D with a Webra 120. If you want my opinion, the way to get out of your predicament the cheapest is get on ebay and sell that webra for around 200$ and spend 70 more bucks and get an O.S. 160 and then you can get any 72 in airplane you want and I guarantee you that the engine will allow for max 3D performance.

3D/Kit/ARF
 

And for that you could get a Funtana-Which is based on the Katana.