RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)
-   -   Ariel (https://www.rcuniverse.com/forum/3d-flying-82/336099-ariel.html)

dirkzuid 10-28-2002 04:45 PM

Ariel
 
I am looking for an "Ariel" 2x2 pattern plane in good condition, with or without motor and servos. Please let me know if there is any available.
Thank you,
[email protected]

Troy Newman 10-28-2002 07:13 PM

Ariel
 
The Ariel is not a full 2x2 bird.....Its short by about 2-3inches and the wings are short also....

It is a good flying plane....but was designed around the 120's circa 1993-94

You might check with Dick Hanson.....his son Guy designed the Ariel....Dick wasn't all that thrilled with the plane but I liked mine. In fact mine is still flying in the hands of an advanced pilot locally.

Its probably got in the Thousands of flights on it by now I know I put about 1200 on it personally and the last time I flew it was the 98 NATS......

Check with Dick....Dave Stewart was making the kits or at least the fuse...Dick can help you out with some answers....


http://www.concentric.net/~Dhmodels/


Good Luck


Troy Newman

dirkzuid 10-29-2002 12:24 AM

Ariel
 
Thank you for your response. I sent a mail to DH models and got as response that he does not have any more kits.
I also like the model alot and would very much like to get another one. I know there are many much more modern models on the market of which I have a few, but I also like the lines of this classic. If you know of any that might be for sale, please let me know.
Thanks a lot,
Dirk


All times are GMT -8. The time now is 04:58 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.