|
DA or BME 100
Have a H9 sukhoi and want to buy engine. The DA and BME seem to be the same price. What are the differences? Which has more power? The BME is lighter but the DA has a longer stroke and is larger. Which is more user friendly?Help me decide. Thanks.
|
DA or BME 100
The DA is stronger than the BME 102, but either engine will have more than enough power for a 26 lb plane like the Sukhoi. The BME will require more nose weight than the DA, so the overall plane weight will be the same. You might also consider the new 3W-106, weighs the same as the DA and at least as much if not more power.
BME also has new Extreme 110cc motor coming out, but it hasn't hit the street yet. You would be a guinea pig on this one. |
DA or BME 100
I'd almost kill for that BME 110E. I want one sooo bad for my A/W Sukhoi! Cant wait till it gets out! :eek: :D
|
DA or BME 100
Mr. Dean,
Would you by any chance be related to Jerry Dean? I worked at Mike's in Carrollton a year or two ago for a while, and I knew Jerry from there and from racing. If so, tell him Dave from Mike's said hi... If not, sorry to bother you. David |
Engine
1 Attachment(s)
Im puting a 3W 100 B2 SS on my H-9 Sukhoi :D
|
DA or BME 100
I am with JoshFlies3D, but I have a 35% Cap, not a Suk.
|
DA or BME 100
Originally posted by hroachen Mr. Dean, Would you by any chance be related to Jerry Dean? I worked at Mike's in Carrollton a year or two ago for a while, and I knew Jerry from there and from racing. If so, tell him Dave from Mike's said hi... If not, sorry to bother you. David Hey Dave, I am not related to Jerry Dean, But met him once at a trackmeet, If I see him I will let you know you said hi. I'll tell Mike you said hi, I'm heading out there in a little bit.. Later, Coulter :) |
Go DA!
1 Attachment(s)
!
|
DA or BME 100
JR
Sorry Chris, I just have to get you going... |
DA or BME 100
Go for a DA, can't go wrong. There must be a reason that DA won TOC and everybody flys DA.
|
DA or BME 100
Is that why 3W won the TOC 3 times in a row in the with Quique, and I'm sure many times before that? :surprised
|
DA or BME 100
But they didn't win this year, that must mean they're no good anymore. :D
|
DA or BME 100
I'll bet they'll win in 2003... :cool:
|
DA or BME 100
Ahem ..BACK to the original subject. . .
Either the BME102 Evo or the DA100 would be great engines for the Suk. If you build heavy, then the DA would be preferable sicne you will wind up needing more nose weight. If you build light, and take care to use rudder pull-pull and mount the batteries forward in the fuselage, then the BME would be preferable. By losing well over a pound of weight with the BME, and getting the weight out of the tail as much as possible, you would have a faster reacting, better flying plane than with the DA, no matter the power difference between the two engines. Everything the plane will do in the air, from snaps to rolls and 3D, will be improbved by minimizing nose and tail weight. this can only be accomplished by removing as much engine weight as possible, then setting up the tail contolrs, radio gear and servo locations to minimize the tail weight. Overrotattions and tails wagging around are caused by mass and weight back there, and are not effectively damped by the engine at the other end. My advice. . Get the BME, get the tail light enough to establish a proper CG without adding ballast in the cowl area, lighten the plane 1.5+ pounds on top of it, and have a better overall flying plane that reacts better to control inputs, is still tremendously overpowered, and has a much beter damped tail at the end of snaps and hard 3Dmaneuvers. Hope this helps |
DA or BME 100
Good info there. I to am on the fence for my SU-31 on motor choice. BME, DA and the Zenoha GT-80 are all being looked at. So many choices !
|
DA or BME 100
DO NOT PUT A ZENOAH ON IT!!! take a zdz 80 and add a brick to it and you have a zenoah. I would go with DA if you need the extra nose weight, if its not tail heavy (which I have yet to see) a BME would be great. Chances are you will need nose weight, so I'm sure the DA would be perfect.
|
DA or BME 100
More like take a ZDZ 60 and put a brick on it...thats a GT 80.
Originally posted by rcflyer86 DO NOT PUT A ZENOAH ON IT!!! take a zdz 80 and add a brick to it and you have a zenoah. I would go with DA if you need the extra nose weight, if its not tail heavy (which I have yet to see) a BME would be great. Chances are you will need nose weight, so I'm sure the DA would be perfect. |
DA or BME 100
LOL I would agree. Dont do anything Hangar9 recomands. The only reason they recomend zenoah, saito and mds is because they are all sold by horrizon. Nothin wrong with horizon, but they dont sell the best giant scale engines, Desert Aircraft does. Go DA!
|
DA or BME 100
In 2001 TOC quique's 3W in the primary plane tore itself up in the air and cost him the championship. I vote for DA
|
Fox
Fox makes great engines too. Check them out. But you can't do better than a DA. It is only 5 bucks more than the Fox too :rolleyes: I think the Fox comes with mufflers, not sure though. I know it is an extra $145 for the mufflers for the DA.
|
DA or BME 100
DA!!!
|
DA or BME 100
Originally posted by lv2rcav8 DA!!! |
DA or BME 100
Originally posted by rcflyer86 AMEN!! |
DA or BME 100
OK DA or BME looks like. Is this Ford Chevy thing or is one way better than the other? Im looken for an easy mount of motor also.
Chief Aircraft sells a bracket for the BME, which I assume uses the stock bolt locations. I like info on the DA, but will it be an easy mount ? Will it need new holes taped or stand offs ? Any info on the mounting is appreciated ! |
DA or BME 100
The DA will probablly need standoffs,but they are easy as pie,and light,Check them out at www.aerografixs.com
Mike |
| All times are GMT -8. The time now is 08:58 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.