need help for plane selection
 

Hi folks,

it's now two years that i started teaching my 15 years old neveu.
He is doing very well now and flying solo sport airplanes.
Yesterday evening he came home very nervous and started talking to me about 3D flying, I quickly understood that he wants to have a 3 D plane for next sumer and start to play somenzini at the flying field.
I went in my workshop this morning looking in my engine reserve. I have a wonderfull OS120 surpass resting in his box since 3 years
Please help me to make a selection between the dozen of available planes.

The airplane must be
1) without vertical performance limits
2) fully 3D
3) ARF (my neveu is too young to have the patience for building)
4) strong

Actualy I think the u can do 3D could be a good choice

please give me your advises

need help for plane selection
 

woops, I went to greatplanes site read the technical note about overpowering the bird, Maybe i'll change my mind

I am listening to your opinion and suggestions

need help for plane selection
 

I have this engine (actually a Surpass 120 III)in a Super Kraft Extra 300-60 and the performance is outstanding. If you run a search you will find lots of details about the plane.:)

need help for plane selection
 

I own the SIG extra 300 already
Maybe i am not clear because of my poor english, sorry for that I am a frenchie
What I search is a pure 3D design

need help for plane selection
 

http://www.theworldmodels.com/funworld3d.htm

http://www.aero-works.net/planes/300profile/index.html
Aeroworks just came out with this In an arf form this is truly a 3d machine.
Hope This Helps.

If you have an OS46FX or better the 50SX.
 

For those sized motors, or the YS63, the Madness by ZNLine is a great 3D funflyer type machine. Contact ZNLine in Jurbise, near Mons, for availablility. Phone is 065-334466.

Thanks,
Mark

need help for plane selection
 

mmmmmm giving a madness to my neveu will be like giving caviar to a pig.