THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

now that i got your attention, i am building an ultrafly outrage and i was wondering if there was any sort of modifications that improve its flight or strength that arent listed in the instructions.

RE: THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

Yeah start shooting a .223

MPB

RE: THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

i already do, its our coyote gun, and BOY is it accurate

RE: THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

Ruger No.1, 22-250, 39 gr of H-380, 55 gr Nosler Balistic Tips.
Explodes a coyote at 300, 1\2 inch five shot groups at 200 yards.

Brian

RE: THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

i think it would be cool to attach a high powered rifle to an rc plane. disguise your plane as a goose, fly right up to the deer, and BAM!;)

RE: THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

Been flying an outrage for a bit and have some upgrades.
The wings flex a bunch! They flex enough that the alerons will not work well under heavy load. I epoxied CF rod diagnally from the bottom of outside wing strut to the above the aleron servo. Huge differnece. CA hinges work better on the tail feathers then the tape the instructions suggest. Check out the new micro tail wheel from Dubro! Perfect for this model!

RE: THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

Only advice I can give for now is to really think twice and then twice again when you do the decals on the thing. The stickers that came with the one I built for another chap was a disaster and nothing really fit the model well. Test fit all of them and really think well before you stick. I ended up leaving half the stuff off so I wouldn't destroy the model. Hehehe

RE: THIS IS AN OUTRAGE!!!!!!!!!!!!!
 

I have to agree with Spacey on the decal thing. None of mine fit right at all. Really looked like cr*p when done. Some of them were over the edge of the wing and had to be trimmed and some fell short and had white showing at the end. To make it all even better, the next day half of the edges lifted. I started taping the edges with wing tape, then decided against it and took all the wing decals off.Funny thing is all the decals for the fuse were good. None of them lifted and some were over compound curves. I think it's the wings are a different type of foam. I have seen where some guys were spray painting their Outrage to save the weight of the decals.
Peter