RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)
-   -   help please when i put the cowl the engines goes (https://www.rcuniverse.com/forum/3d-flying-82/5000293-help-please-when-i-put-cowl-engines-goes.html)

AEROFUNRC 11-15-2006 04:32 PM

help please when i put the cowl the engines goes
 
hi i got a extreme fligth yak 54 i am using a zenoah g 62 modified ports excellent power plant alot of power but when i put the cowl the engine goes rich i need help ? please maybe is the big intake that dont work good or too big exit? i am using spinner

whaturi 11-15-2006 08:26 PM

RE: help please when i put the cowl the engines goes
 
if air is forced into the carb when the cowl is off, maybe putting the cowl on blocks air to the carb, resulting in running to rich?

try to tune it with cowl on, obviously.

or you could try to baffle it so as to get air into the carb like when cowl is off.

AEROFUNRC 11-16-2006 12:02 AM

RE: help please when i put the cowl the engines goes
 
i will try on somenzini yaks they are flat on the front may that big hole in front is the problem what you think?

AeroDave 11-16-2006 03:38 PM

RE: help please when i put the cowl the engines goes
 
You need a velocity stack to run from the carb to outside the cowl.

AEROFUNRC 11-17-2006 09:30 AM

RE: help please when i put the cowl the engines goes
 
i am using a velocity stack , i look for 3w article that says that you have to put a brass tubing upside the hole of the carb and a gas tubing on to the firewall , lets see if it work


All times are GMT -8. The time now is 04:55 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.